VEKARIA (TSP821) ماكنة خراطة دبل + أساور

We are highly acclaimed in this industry for providing an optimum quality range of Bangle Turning Machine.

Details:

• Turning machine for inside, outside, side turning of bangle and ring with variable programmable speed controller.
• Especially designed compact table top portable machine works on the principle of lathe machine with variable speed suitable for straight and eccentric mill grain work on Wedding Bands.
• Besides, all type of inner, outer, side, concave and convex turning, chamfering, polishing and lining, channel setting, prong cutting, etc.
• Micromatic screw for varying the radius.
• Both ‘X’ and ‘Y’ axis are provided with identical stoppers and locking device for mass production and safety.
• Clamping and declamping of bangle and ring varies within fraction of seconds.
• Mirror finish on work piece with a feather touch of simple diamond tool (no fancy tools required).
• Tapering of rings on both sides with a special tool holder and special taper turning device.
• Outer turning of bangle and ring is possible with the same collets of faceting and milling machine.
• Mill grain tool holder is provided for knurling bangle and ring.
• True chuck fixture for lathe type of work can be supplied on request.
• Triangle, square, oval, turning device for inner and outer turning, flat, concave, convex, channel and mill grain on wedding bands.
• An effective “Auto-Electro Brake System” which stop spindle instantly (optional accessory).
• Ideal for medium and large scale jewelry industries.

Specifications:

• 1-a Longitude Slide ‘X’ Axis with Fine Graduated Wheel.
• 1-b Adjustable Stoppers for ‘X’ ‘Y’ Axis.
• 2-a Slide Locking Key.
• 2-b Transverse Slide ‘Y’ Axis with Fine Graduated Wheel.
• 3-a Control Panel.
• 3-b VFD (Variable Frequency Drive).
• 4-a ATM04-41: Ring Inner Turning Device.
• 4-b ATM04-32: Ring Inner Turning Collet.
• 4-c ATM01-21: Concave and Convex Turning Tool Holder.
• 4-d ATM04-24: Ring Inner Turning Tool Holder.
• 5-a ATM01-23: Facing Tool Holder 90mm for One Tool.
• 5-b AFM36-11: Ring Collet for Circumferential.
• 5-c AFM28-23: Ring Collet Mandrel (12mm).
• 5-d ATM04-26: Ring Holding Device for Taper Turning.
• 6-a ATM04-17: Ring Eccentric with Indexing for Inner / Outer Turning Device from 0 To 8 mm with set of Counter Balance.
• 6-b ATM04-18: Ring Outer Turning Collet Mandrel (12mm) for Eccentric Device.
• 7-c ATM01-24: Knurling Tool Holder.
• 8-a ATM04-19: Ring Inner Turning Collet Mandrel (12mm) for Eccentric Device.
• 8-b AFM04-09: Ring Eccentric Inner Turning Collet.
• 9-a ATM01-27: Cutter Arbor for Turning Machine.
• 9-b ATM06-01: Vertical Sliding Device with Indexing Device AFM41-73.

Additional Information:

• Item Code: TSP-821.